Wond3rstick Multi Boot USB stick FAQs

Wond3rstick Multi Boot USB stick 

FAQs

Warning: Please do not delete anything from the flash drive as it may result in the malfunction of the Wond3rstick.

MS Windows 11 10 keys click HERE

To boot Multi boot usb stick Press F11 or F12 to enter Boot menu  to enter into  BIOS/UEFI press F2 or DEL(depends on your machine, please check your vendor FAQ)

To install Linux please turn off secure boot.

Some Software works only in BIOS some in UEFI, please check the software list and wond3rstick version: click HERE.

[BIOS] HDAT2 v7.4

[BIOS] MemTest86+ v5.31 Beta

[BIOS] Spinrite v6.0

[BIOS] Ultimate Boot CD v5.3.9

[BIOS] Boot-Repair-Disk v2021.12.16

[BIOS] BootIt Bare Metal v1.70

Linux Distros or some other ISO’s  works   without SECURE BOOT  please turn of this option in UEFI/BIOS please USE GRUB MODE to install.

Windows 11, 10 works in WIMBOOT mode or NORMAL mode  after Entering in Boot Menu

Secure boot warnings while Booting multi boot usb  Wond3rstick in UEFI MODE with secure boot. Regarding Secure Boot in UEFI mode, Wond3rstick has the capability to boot successfully regardless of whether the secure boot feature in the BIOS is enabled or disabled. In the event that secure boot is enabled, you should encounter the following screen when initially booting Wond3rstick. To proceed, please refer to the instructions provided below.

However, it's important to note that this solution may not be flawless. If you encounter an error screen instead of the aforementioned blue screen (e.g., Linpus Lite xxxx), it indicates that the secure boot solution is incompatible with your machine. In such cases, it becomes necessary to disable the secure boot option in the BIOS.

Here is a step-by-step guide for utilizing Secure Boot in UEFI:

1. These steps only need to be performed once for each computer during the initial boot of Wond3rstick.

2. There are two available methods: Enroll Key and Enroll Hash. You can choose either of these methods based on your preference and requirements.

To run your own ISO :

1. Upload your iso on ISOimages folder (some iso's not supported try to search compatible ISO)